Publicidad
You can check the clock time while cooking is in
progress by touching the CLOCK pad.
NOTE: ONCE THE TIME HAS BEEN SET IT WILL
CONTINUE TO SHOW UNTIL THE UNIT IS
UNPLUGGED OR POWER LOST.
A. One-stage Cooking
38B
Use the number pads to set a cooking time.
1.
You can set a cooking time from one second to
99 minutes and 99 seconds.
If you want to set a power level other than
2.
100% power, touch POWER, then use the
number pads to enter the power level. You can
set the power level from 1 to 9.
Use single digits to set a cooking power level:
Number pad
9
8
7
6
5
4
3
2
1
Touch START/MINUTE PLUS to start cooking.
3.
SPEED DEFROST
Touch SPEED DEFROST.
1.
Enter desired defrosting time by touching
2.
correct number pads. Digital timer sets minutes
and seconds from left to right so a single digit
can be set (5 for 5 seconds ) or up to 4 digits
(2405 for 24 minutes 5 seconds).
Touch START/MINUTE PLUS.
3.
NOTE:
After time has elapsed four signals sound and END
appears in display. Touch STOP/RESET pad or
open door to clear END before starting another
cooking function. During defrosting program, the
system will pause and sound beeps to remind user
to turn food over, and then press START/MINUTE
PLUS to resume the defrosting.
DEFROST BY WEIGHT
Touch DEFROST BY WEIGHT pad.
5.
SETTING A COOKING PROGRAM
20B
Cooking power
90%
80%
70%
60%
50%
40%
30%
20%
10%
cancel TIMER during timing process.
B. Multi-stage Cooking
For added convenience your oven offers the ability
to operate in a "Multi-Stage" cooking cycle. Each
cycle or stage can be set with a separate cooking
time and or power level.
a) To set the oven in Multi-Stage cooking
model, simply set the time and power level
of the first stage (as described in Section
One-Stage Cooking to the left).
b) To set the second cooking stage, press the
COOK key ("MEM" will appear in the
display window).
c) Select the desired cooking time and power
level for the second stage.
d) Press "Start/MINUTE PLUS" to begin the
cooking process.
NOTE:
After cooking stage 1 has elapsed, you will hear
one "beep" sound, signaling the beginning of
stage 2. After the total time (selected cooking
times for both stages) has elapsed, 4 "beeps"
will sound and "END" will appear in the display
window. Touch the "STOP/RESET" button or
open the oven door to clear or end the cooking
program
before
function.
COOK BY WEIGHT
Touch COOK BY WEIGHT.
1.
Enter the one digit code by touching the
2.
correct number 1~3 (shown below) pad .
Enter weight.
3.
Touch START/MINUTE PLUS pad.
4.
Cook By Weight Code Description
CODE
TYPE
1
Beef
2
Mutton
3
Pork
Note:
Weight must be in pounds and ounces.
14
starting
another
cooking
MAX WEIGHT
5 lb. 16 oz.
5 lb. 16 oz.
5 lb. 4 oz.
Publicidad
