Installation Instructions; Inserting Lp Gas Tank; Securing Lp Gas Tank; Disconnecting Lp Gas Tank - Master Forge GBC2432L Manual Del Usuario

INSTALLATION INSTRUCTIONS

To operate, you will need one precision-filled standard grill LP gas tank with external valve threads.
CAUTION
20 lb
W LP gas tank must be properly disconnected
9 Kg
and removed prior to moving this grill.

Inserting LP Gas Tank

12.2 in. / 31 cm
Place precision-filled LP gas tank upright into the notches in the
right cart frame so the tank valve is facing the gas line connection.

Securing LP Gas Tank

Secure tank by sliding the tank retainer wire over shoulder of
LP gas tank.
Connecting LP Gas Tank
1. Make sure control knobs are in the " OFF" position (Figure 2).
2. Before connecting, be sure there is no debris caught in the head
of the LP gas tank, head of the regulator valve or in the head of the
burner or burner ports.
3. Connect regulator/hose assembly to tank by turning knob clockwise
until it stops.
4. Perform leak test per "Checking for Leaks" section.

Disconnecting LP Gas Tank

1. Make sure control knobs are in the " OFF" position (Figure 2).
2. Before disconnecting, make sure the LP gas tank valve is "CLOSED".
3. Disconnect regulator/hose assembly from LP gas tank by turning knob
counterclockwise until it is loose.
W CAUTION:LP Gas Tank must be properly disconnected and
removed prior to moving this grill.
4. Place the protective cap cover on the LP tank and store the tank
outdoors in a well ventilated area out of direct sunlight.
13