Publicidad
Idiomas disponibles
Idiomas disponibles
Read these notes and warnings before you start to clean your sprayer!
• When using latex materials, clean your sprayer and
components with water. When using oil-based
materials, use mineral spirits.
• Do not use mineral spirits on latex materials, or the
mixture will turn into a jelly-like substance which is
difficult to remove.
• No matter which cleaning solution you use, make sure
to dispose of it properly when finished cleaning your
sprayer.
• Thorough cleaning and lubrication of the sprayer is
the most important step you can take to ensure proper
operation after storage.
Call 1-800-981-7834 if you have any problems or questions regarding the cleaning of your sprayer.
Follow these steps if you used latex materials AND if you have a garden hose available. If you do not have a garden
hose available, follow the Cleanup for Oil-Based Materials instructions.
1. Lock the gun and remove the spray tip assembly. Place
the suction tube and return tube into an empty waste
container.
3. Remove the inlet filter from the suction tube and place
into a waste container.
Important Cleaning Notes!
Cleanup -
Empty waste
container
Follow these steps whenever cleaning with
mineral spirits:
• Always flush spray gun at least one hose length
away from spray pump.
• If collecting flushed solvents in one gallon metal
container, place it into an empty five gallon
container, then flush.
• Area must be free from vapors.
• Follow all cleanup instructions.
• DO NOT use gasoline to clean your sprayer.
Latex materials
2. Using a garden hose, rinse off the suction tube, return
tube and inlet filter. Empty the waste container.
4. Verify that the seals are
present inside the adapter
and suction tube (a).
Thread the pump cleaning
adapter (b) onto a garden
hose (c). Connect hose
and adapter to the fitting
on the end of the suction
tube (d).
Continued on next page.
13
(d)
(b)
(a)
(c)
English
Publicidad
