SprayTECH ProForce PF23 Manual Del Usuario página 18

Short-Term Storage (up to 16 hours)
Follow these steps when using latex materials only. If using materials that are oil-based, follow the Cleanup and Long-
Term Storage steps.
Shutdown
1. Lock the spray gun off.
2. Turn the PRIME/SPRAY knob to PRIME. Switch the pump
OFF (O). Unplug the sprayer.
Startup
1. Remove the gun from the plastic bag. Stir the water into
the paint.
3. Turn the PRIME/SPRAY knob to SPRAY. Test the
sprayer on a practice piece and begin spraying.
English
3. Pour 1/2 cup water slowly on the top of the paint to
prevent the paint from drying. Wrap the spray gun
assembly in a damp cloth and place it in a plastic bag.
Seal the bag shut. Place the sprayer in a safe place out
of the sun for short-term storage.
2. Turn the PRIME/SPRAY knob to PRIME. Plug sprayer in.
Turn the switch to ON (I).
18