SprayTECH ProForce PF23 Manual Del Usuario página 15

1. Lock the gun and remove spray tip assembly. Submerge
suction set into a bucket with appropriate cleaning
solution.
Bucket with
cleaning
solution
3. While pulling the gun trigger, turn the pump ON (l), and turn
the PRIME/ SPRAY knob to SPRAY to purge material from
the hose back into the original container.
Keep holding trigger through next steps.
4. When cleaning solution comes from the spray gun, keep
holding the trigger and aim the spray gun into the side of the
waste container (ground gun with a metal container if
flushing with flammable solvent).
5. Trigger the gun until the fluid coming out of the gun is
clear. You may need to dispose and obtain new cleaning
solution.
6. Turn the PRIME/SPRAY knob to PRIME and trigger gun
once to relieve pressure.
Cleanup -
Oil-based materials
2. Place a waste container next to the original material
container. Aim the spray gun into the side of the original
material container and hold the trigger.
Waste
container
Containers should
be touching
• Hold trigger
• Turn pump ON (l)
• Turn PRIME/SPRAY knob to SPRAY
Spray cleaning solution
into waste container
Move on to Cleaning the Suction Set.
15
Hold trigger
Original
material
container
Spray material into
original container
English