SprayTECH ProForce PF23 Manual Del Usuario página 19

Follow these instructions only after all cleanup steps have been performed.
1. Fill a cup or other container with separating oil
(approximately 2 ounces) supplied with the unit and
submerge the inlet valve into the oil.
2. Place a rag over the spray hose port, and turn the switch
ON (l). When the oil has been sucked from the cup, turn
the pump OFF (O).
3. Wipe the entire unit, hose and gun with a damp cloth to
remove accumulated paint. Replace the high pressure
hose to the paint hose port.
Long-Term Storage
Separating oil
19
English