Publicidad
Idiomas disponibles
Idiomas disponibles
Before you begin -
Locking the Spray Gun:
Always lock the trigger off when attaching the spray tip or when the spray gun is not in use.
Locking the spray gun
The gun is locked when the trigger lock is at a 90º angle
(perpendicular to the trigger in either direction).
Plugging in the Sprayer:
1. Check that the ON/OFF switch is in the OFF (O) position.
Pressure Relief Procedure:
Be sure to follow the Pressure Relief Procedure when shutting the unit off FOR ANY PURPOSE. This procedure
is used to relieve pressure from the spray hose.
1. Lock the spray gun off (see
directions above). Flip the
ON/OFF switch to the OFF position.
This section contains instructions that
will be repeated throughout this manual.
Unlocking the spray gun
To unlock the gun, turn the trigger lock to be in line with the
trigger.
2. Plug the power cord into a grounded outlet or heavy duty
grounded extension cord. Plug in the extension cord.
Refer to Important Electrical Information, page 3.
2. Turn the PRIME/SPRAY knob to
PRIME.
7
3. Unlock the spray gun and trigger
spray gun into the side of the
material bucket. Lock the spray
gun.
English
Publicidad
