Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Routine Maintenance
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Maintenance
Part
Replacement Period
Frequency
Mop pad
After each use
Every 3 to 6 months
Main brush
Every 6 to 12 months
Dust box's filter
Once every 2 weeks
Every 3 to 6 months
Side brush
Charging dock's
signaling area
Charging contacts
Omnidirectional wheel
Once every month
Bumper
Point laser sensor
Edge sensor
Cliff sensors
Water tank
Clean it as needed
Dust box
Note: The replacement frequency will depend on your usage of the robot. If an
exception occurs due to special circumstances, the parts should be replaced.
14
/
/
Routine Maintenance
Clean the Mop Pad
1. Press the release clips on the mop pad holder to remove the mop
assembly. Pull the mop pad off the mop pad holder.
2. Clean the mop pad with water only and leave to air dry before re-installing.
Clean the Water Tank
1. Pour out the water in the tank. Clean with only water and leave it to
air-dry before re-installing.
Note: Do not expose the tank to the sun directly.
EN
15
Publicidad
