Publicidad
Idiomas disponibles
Idiomas disponibles
Before Use
EN
1. Remove the protections
2. Install the side brush
Click
R
L
L
R
OFF ON
Note: Install the side brush until it clicks into place.
10
3. Place the charging dock on the level ground
against the wall and connect it to a power outlet
＞ 0.5 m
＞ 1.5 m
＞ 0.5 m
Note:
· Keep the immediate area 1.5 m in front of the charging dock and 0.5 m to its
· To ensure you can connect to the robot with your phone well, make sure the
both sides clear of objects.
· Do not place the charging dock in an area with direct sunlight or where other
robot and charging dock are within WiFi range.
objects might block the signal, as this may hinder the robot from returning to
the charging dock.
4.Place the robot onto the charging dock to charge
Note:
· Fully charging is recommended before first-time use. This ensures that the
· Do not move the the charging dock while the robot is cleaning.
robot returns to the charging dock successfully.
Connecting with the Dreamehome App
Scan the QR code on the robot, or search "Dreamehome" in the app store to
download and install the app.
R
L
QR code
R
L
OFF ON
2. Add Device
Open the Dreamehome app, tap " " in the upper right, and scan the same
QR code again to add the device. Please follow the prompts to finish the
Wi-Fi connection.
R
L
QR code
R
L
OFF ON
Note:
· Only 2.4 GHz Wi-Fi is supported.
· Due to upgrades in the app software, the actual operations may differ from
the directions in this manual. Please follow the instructions based on the
current app version.
3. Reset Wi-Fi
Simultaneously press and hold the buttons
and
until you hear a voice
prompt saying, "Waiting for the network configuration." Once the Wi-Fi
indicator turns solid white, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and
add the device again.
Wi-Fi Indicator
· OFF: Unconnected
· Quick Blinking White:
Releasing the hotspot
· Slow Blinking White: Connecting
· Solid White: Connected
EN
11
Publicidad
