Silvercrest SSMW 750 D2 Instrucciones De Utilización Y De Seguridad página 22

m WARNING! Risk of
electric shock! Never use a
damaged product. Disconnect
the product from the power
supply and contact your
retailer if it is damaged.
The product is not to be used
if it has been dropped, if there
are visible signs of damage.
The product is powered at all
times while it is connected to
the power supply.
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label.
Regularly check the power
plug and the power cord for
damages. If the power cord is
damaged, it must be replaced
by the manufacturer, its service
agent or similarly qualified
persons in order to avoid a
hazard.
Protect the power cord against
damages. Do not let it hang
over sharp edges, do not
squeeze or bend it. Keep the
power cord away from hot
surfaces and open flames.
CAUTION! Hot surface!
During use the product gets
hot. Do not touch the product
while in use nor immediately
after use.
During use, care must be taken
as low heat may be generated
at the handle.
Operation
The product must not be
left unattended while it is
connected to the supply mains.
Do not move the product while
it is in operation.
Do not use the product without
an inserted set of plates.
Do not place the product on
hot plates (gas, electric, coal
cooking range etc.).
GB/IE 23