Keeping Data In Memory; Service And Repair; Service And Repair Contact; Accessories/Parts For The Product - HURNER HSK HWW-1000 Manual Del Usuario

ther confirmation message "Delete Memory, sure?" is shown, which
has to be confirmed by pressing the START/SET key once again. Then,
the report data in memory are deleted.
5.6

Keeping Data in Memory

When the cable or storage media is unplugged, a "Delete Memory"
message is displayed. Press the STOP/RESET key to keep the current
report data in memory. They can then be printed off once again.
Make a habit of handling the internal storage as described
at the beginning of Sect. 5, to maintain data integrity and
avoid any inadvertent deletion of the reports in memory.
Important
6

Service and Repair

As the product is used in applications sensitive to safety consider-
ations, it may be serviced and repaired — excepting the items specified
below — only on our premises or by partners who were specifically
trained and authorized by us. Thus, constantly high standards of op-
eration quality and safety are maintained.
Non-compliance with this provision will dispense the manu-
facturer from any warranty and liability claims for the product
and any consequential damage.
Important
• Prior to every welding operation, check the state of repair of the
wedge welder, in particular of its gear box.
• Before you store the wedge welder after the last welding of your
schedule, remove any plastic residues from the welding wedge
and the nip rollers; use an alcoholic cleaning agent if necessary.
Keep in mind that the welding wedge remains extremely
hot after the welding operation. Only switching it off at the
On/Off switch or the welding wedge switch will result in its
starting to cool down.
Caution
• Lubricate the gear box on a regular basis.
• Clean the wedge welder regularly, in particular when it is going
to be stored for a prolonged period of time.
7

Service and Repair Contact

HSK Kunststoff-Schweißtechnik GmbH
Zilzkreuz 1
53604 Bad Honnef, Germany Fax: +49 (0)2224 90 17 503
Web: www.hsk-kunststoff.de E-mail: info@hsk-kunststoff.de
We reserve the right to change technical specifications of
the product without prior notice.
Info
8

Accessories/Parts for the Product

Only genuine spare parts are acceptable. The use of non-
genuine parts voids any and all liability and warranty on the
part of the manufacturer.
Info
16
EN
Tel.: +49 (0)2224 90 17 501
HÜRNER | HSK HWW–1000 User's Manual
HSK Kunststoff-Schweißtechnik GmbH
53604 Bad Honnef, Germany
Zilzkreuz 1
Version February 2014