DXV Rem D35100330.144 Instrucciones De Instalación página 5

11
TEST INSTALLED FITTING AND CONNECTIONS FOR LEAKS
• With FAUCET HANDLES in OFF position, turn on WATER SUPPLIES (1) and check all connections for leaks.
• Operate both handles to flush water lines thoroughly. Turn diverter to rim wash and bidet spray.
• Operate LIFT ROD (2) and fill bidet with water. DRAIN STOPPER (3) should make a good seal and retain water
in bidet. If DRAIN STOPPER (3) does not make a water tight seal see "Troublingshooting Guid" section in
these instructions
• Release DRAIN STOPPER (3) and check all drain connections and "P" trap for leaks.
NOTE: Diverter valve is not a positive shut-off to rim wash.
1
3
1
- 5 -
Tighten if necessary.
2
M965497 Rev. 1.8 (3/23)