Publicidad
Idiomas disponibles
Idiomas disponibles
Preparing for Installation
Tools Needed
Phillips screwdriver
Level
Pipe wrench (2)
(one for support)
Parts Provided
Template (1)
Anchor sleeves (6)
Parts not Provided
4-wire or 3-wire cord and
strain relief kit
(UL approved 40 or 50 AMP)
Materials You May Need
• Gas line shut-off valve
• Pipe joint sealant that resists action of natural and LP gases
• Flexible metal appliance connector (
Never use an old connector when installing a new range.
• Flare union adapter for connection to gas supply line (
• Flare union adapter for connection to pressure regulator on range (
• Liquid leak detector or soapy water
• Lag bolt or
1
/
" O.D. sleeve anchor (for concrete floors only)
2
1
Flat-blade screwdriver
/
Open-end or
adjustable wrench
Tape measure
Anti-tip bracket kit (1)
Lag bolts (6)
Strain relief
(For conduit
Installations only)
3
/
" or
1
/
" NPT x
4
2
" Nut driver
Pliers
4
Drill
Safety glasses
Gloves
Front rail (1)
Leg cover (2 sets)
1
/
" I.D.)
2
3
/
" or
1
/
" NPT x
1
/
" I.D.)
4
2
2
1
/
" NPT x
1
/
" I.D.)
2
2
INSTALLATION
19
Dolly
Screws (8)
(Leg cover, Front rail)
Publicidad
