Publicidad
Idiomas disponibles
Idiomas disponibles
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised
specialists
• Installing and replacing non-original spare parts
• Improper use
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper
and economic operation of the product, for avoiding
danger, for minimising repair costs and downtimes and
for increasing the reliability and extending the service
life of the product. In addition to the safety instructions
in this operating manual, you must also observe the
regulations applicable to the operation of the product in
your country.
Familiarise yourself with all operating and safety in-
structions before using the product. Only operate the
product as described and for the specified areas of ap-
plication. Keep the operating manual in a good place
and hand over all documents when passing the product
on to third parties.
2
Product description (Fig. 1-6)
1.
Rear handle
2.
On/off switch
3.
Switch lock
4.
Battery mount
5.
Locking nut (tool attachment)
6.
Locking mechanism
7.
Telescopic tube
8.
Front handle
9.
Carrying eye
10.
Lock button (tilt adjustment)
11.
Tool attachment (hedge trimmer)
12.
Cutter bar
13.
Blade guard
14.
Tool attachment (pole-mounted pruner)
15.
Oil tank
16.
Chainsaw guide bar (guide rail)
17.
Saw chain
18.
Chain tensioning wheel
30 | GB
19.
Guide bar and chain guard
20.
Shoulder strap
21.
Chain cover
22.
Chain wheel
23.
Guide pin
24.
Stud bolts
25.
Oil level indicator
26.
Release button (battery)
27.
Battery*
* = not included in the scope of delivery!
3
Scope of delivery (Fig. 1)
Item
Quanti-
ty
11.
1 x
13.
1 x
14.
1 x
16.
1 x
17.
1 x
19.
1 x
20.
1 x
1 x
1 x
4
Proper use
The product may only be fitted to the motor head sup-
plied.
Brushcutter:
The strimmer (using the cutting knife) is suitable for cut-
ting shrubs, strong weed and undergrowth.
Grass trimmer:
The grass trimmer (using thread coil with trimming line)
is suitable for cutting lawns, grass areas and light
weed.
Hedge trimmer:
This hedge trimmer is intended for cutting hedges,
bushes and shrubs.
Pole-mounted pruner (chainsaw with telescopic
handle):
The pole-mounted pruner is intended for branch remov-
al work. It is not suitable for extensive sawing work and
felling trees as well as sawing materials other than
wood.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance
of the safety instructions, as well as the assembly in-
structions and operating information in the operating
manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about
potential dangers.
www.scheppach.com
Designation
Tool attachment (hedge trimmer)
Blade guard
Tool attachment (pole-mounted prun-
er)
Chainsaw guide bar (guide rail)
Saw chain
Guide bar and chain guard
Shoulder strap
Cordless multi-function device
Operating manual
Publicidad
