Medion LIFE X14308 Manual De Instrucciones página 175

.. Setting up TV reception
Use the  buttons to select the desired option and
press O K to highlight it. Use the  button to continue
with the operation and  or
 After setting up the device, select WATCH LIFETV >
CHANNEL SCAN or press the I N P U T button and
select TV as the input source. A welcome screen will
appear along with a message telling you that no chan-
nel information is available.
 Select BEGIN SCANNING and press the O K button:
Reception
Satellite
Antenna
Cable
 Now select the type of reception required: SATELLITE,
ANTENNA or CABLE.
 Press the  button to start the installation process.
... Antenna
.
Make sure that you have connected a DVB-T2
antenna to the RF connection.
Mode setup
Channel All Channels
Scan Mode DTV
The following options are then available:
CHANNEL
Select ALL CHANNELS or FREE CHANNELS here. This
option may not be available depending on the country/
region/provider.
SCAN MODE
Choose between only digital channels (DTV), digital and
analogue channels (DTV+ATV) and only analogue chan-
nels (ATV).
 Then press the  button to start the scan.
 Select STOP to cancel the process.
 Confirm with DONE to complete the process.
 Select RESCAN again to start a new channel search.
to go back one step.
Auto Channel Scan
Auto Channel Scan
... Cable
.
Make sure that you have connected your cable
connection to the RF connection.
Mode setup
Channel All Channels
Scan Mode DTV
Search Mode Frequency Scan
Network ID
Start Frequency
LCN Off
The following options are then available:
CHANNEL
Select ALL CHANNELS or FREE CHANNELS here. This
option may not be available depending on the country/
region/provider.
SCAN MODE
Choose between only digital channels (DTV), digital and
analogue channels (TV+ATV) and only analogue channels
(ATV).
SEARCH MODE
Select the desired search mode FREQUENCY SCAN or
NETWORK SCAN. Leave the setting on FREQUENCY
SCAN if you do not want to configure additional settings.
NETWORK ID
Enter the network ID for the network search here.
This is only possible if you have previously selected NET
WORK SCAN mode.
START FREQUENCY
Enter the start frequency for the network search here.
This is only possible if you have previously selected NET
WORK SCAN mode.
LCN
Logical Channel Numbering: Select the ON setting if you
want to sort the channels based on a preset channel list (if
available from the channel supplier)
 Then press the  button to start the scan.
 Select STOP to cancel the process.
 Confirm with DONE to complete the process.
 Select RESCAN again to start a new channel search.
Auto Channel Scan
EN
MHz
13