Publicidad
Idiomas disponibles
Idiomas disponibles
... Network menu
Network
Network Configuration
Disconnected
Internet Connection
Wake On Wireless Network
Wake On LAN
Bluetooth
NETWORK CONFIGURATION
Use to select the network type WIRELESS, ETHER
NET or OFF.
– CONNECTION TYPE
ETHERNET: In Ethernet mode, the LAN Inter-
net connection is established automatically.
Under IP SETTINGS you can select the setting
DHCP or MANUAL. If MANUAL is select-
ed, you can enter the data for IP ADDRESS,
NETMASK, GATEWAY, DNS SERVER and
DNS SERVER manually with the aid of the
direction buttons and the number
buttons. You can also press O K and then use
the virtual keyboard to enter the values.
WIRELESS: In WLAN mode, an overview of all
available networks is displayed. Make a selec-
tion using the buttons and press the O K
button to confirm. If a password is required for
a network, a virtual keyboard appears which
you can use to enter this with the help of the
direction buttons and the O K but-
ton. After entering the password, select OK
on the keyboard and press the O K button to
confirm.
The following options are available here:
REFRESH
A new search is carried out for available WLAN
networks.
ADVANCED SETTINGS
PIN: Router connection using a generated PIN
code. To connect, enter the displayed code in
your router.
PBC: Quick connect WPS via WLAN. Press and
hold the WPS button on your router and con-
firm with the O K button. Then the WPS con-
nection is established.
IP SETTINGS: Select the DHCP or MANUAL
setting here. You can configure the same set-
tings here as in the Ethernet IP SETTINGS.
26
ADD
Press O K and enter the SSID address man-
ually here using the virtual keyboard. Then
select the desired settings under SECURITY
and select CONNECT to establish the WLAN
network connection.
INTERNETCONNECTION
Use this option to test the Internet connection and call up
network information.
WAKE ON WIRELESS NETWORK
Activate/deactivate the Wake On WLAN function (WoW-
LAN). This enables you to switch on the Smart TV via a
different device. Both devices must be connected to the
same network via WLAN for this purpose. The device be-
ing used as a remote control must be connected to the TV
set once when it is switched on. The control function only
works when the TV is in standby mode.
WAKE ON LAN
Activate/deactivate the Wake On LAN function (WoL). The
function is identical to the Wake On WLAN option.
BLUETOOTH
Activate/deactivate the Bluetooth function. When you se-
lect EQUIPMENT MANAGEMENT, the device automat-
ically searches for nearby Bluetooth devices. Select the
desired device and press O K . The connection will then be
established. Select the desired Bluetooth device and press
O K to call up the following options for this device:
DISCONNECT: Disconnect the Bluetooth connection. The
device will still be listed in the device list.
UNPAIR: the Bluetooth connection is disconnected and
the device is no longer listed in the device list.
BACK: Return to device management.
.
The remote control has a voice control func-
tion. To use this function, the remote control
must be paired via Bluetooth. To do this, open
the EQUIPMENT MANAGEMENT menu and
then press and hold the
mote control until the "Smart TV Remote" de-
vice is listed in the device list and the message
"Paired successfully!" appears.
.
To use the VIDAA voice function, an Internet
connection and a VIDAA account are required.
With the TV BLUETOOTH SPEAKER function, you can
use the TV as a Bluetooth speaker for other mobile de-
vices, activate the Bluetooth function on your mobile de-
vice and select the TV to connect.
button on the re-
Publicidad
