Medion LIFE X14308 Manual De Instrucciones página 193

SELF DIAGNOSIS
The following test functions are available under this option:
– NETWORK TEST
Check the status of the network connection.
– BANDWIDTH MONITORING
Carry out speed tests with third-party Internet
sites.
– INPUT CONNECTION TEST
Test the input connections of the external
sources.
– STATUS CHECK
Call up device status information (e.g. device
ID, operating time etc.)
EMANUAL
Call up the electronic user manual.
SYSTEM UPGRADE
You can configure settings for updating the firmware here.
– AUTO FIRMWARE UPGRADE
Activate this option if the firmware is to be up-
dated automatically.
– CHECK FIRMWARE UPGRADE
You can use this option to search for updated
firmware.
– SYSTEM APP AUTO UPGRADE
Activate this option if the system app is to be
updated automatically.
– UPGRADE FROM USB
You can use this option to update via a USB
storage medium.
DISCLAIMER AND PRIVACY
The following information can be called up and settings
can be configured here.
– TERMS & CONDITIONS, PRIVACY POLICY
This is where you can modify your consent to
the relevant agreements, which will enable or
disable smart features on your device.
– OPEN SOURCE LICENSE
You can view the open source licence decla-
ration regarding the open source applications
that are used here.
– REMOVE USER DATA
This function deletes all of your user data
from the device and the cloud and cannot be
restored. The device will then restart and you
can set up the device again.
MOBILE APP DOWNLOAD
Use this option to install the mobile app on your mobile
device to control the TV. To do this, scan the QR code.
RESET TO FACTORY DEFAULT
Use this option to reset the device to the factory settings.
You have the option of saving existing channel and fa-
vourite lists so that you can access them even after reset-
ting.
 Tick the appropriate box. Otherwise, these lists will
also be deleted.
 Select WIEDERHERSTELLEN and then enter the de-
fault reset PIN to start the process.
. Data protection MEDION
Smart TV
Your Internet-enabled MEDION Smart TV has an Internet
service function. These functions enable you to access
services, content, software and products provided by third
parties on the Internet. In addition, you have access to
open Internet content. Your device checks automatically
via this route whether new software versions are available
for your device. When doing so, your device sends out the
IP address, the software version and the MAC address of
the device to ensure software updates run correctly.
This data is required to make use of the software update
service. Access to applications on the Internet or via Hb-
bTV may, depending on the provider, require a registra-
tion, setting up a user account and/or a subscription when
using certain services. Registration may require the pro-
vision of your personal data and the selection of a unique
and secret password. Please check the privacy policy of
the provider beforehand.
MEDION shall not be liable if the HbbTV or a service does
not comply with the user's requirements, nor does it
guarantee that safe and error-free use of such services can
always occur without restrictions, or continuously, at the
required time.
MEDION shall not be liable for the information or content
provided via HbbTV or the open Internet, nor for its use
and reliability. When you purchase your Smart TV, special
warranties are provided. The validity of these warranties,
including the related disclaimers, remains in force.
If you have any further questions on the subject of data
protection when using your Smart TV, please contact the
respective provider of the Internet service functions or
contact MEDION directly on www.medion.com under the
heading Data Protection.
EN
31