Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Information
• When using direct-driven screw or nutrun-
ners:
Reaction forces depend on tool setting and
joint characteristics. The ability to bear re-
action forces depends on the operator's
strength and posture. Adapt the torque set-
ting to the operator's strength and posture
and use a torque arm or reaction bar if the
torque is too high.
• Use dust extraction system or mouth protection
mask in dusty environments.
Country of origin
Please refer to the information on the product la-
bel.
Spare parts
Parts without ordering number are not delivered
separately for technical reasons.
The use of other than genuine Atlas Copco re-
placement parts may result in decreased tool per-
formance and increased maintenance and may, at
the company option, invalidate all warranties.
Warranty
Contact the Atlas Copco sales representative
within your area to claim a product. Warranty will
only be approved if the product has been installed,
operated, lubricated and overhauled according to
the Product Instructions.
Warranty will not be approved if it should be de-
tected that the electric motor has been opened.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
6
© Atlas Copco Industrial Technique AB - 9836 3108 00
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Symbols on the tool
The symbols on the tool have the following mean-
ings:
A
B
C
QST42-20CT-T50-L134
Directive 2006/42/EC
on Machinery specifies
the essential health and
safety requirements the
product has to meet in
order for the manufac-
turer to affix the CE
marking.
When operating the de-
vice be sure to use cau-
tion.
The symbol indicates
that parts within the
product must be handled
in accordance with the
WEEE Directive.
Publicidad
