Optika Italy IM Serie Manual De Instrucciones página 17

3. Connect the other end of the cable to the USB-C port on the
monitor ④ to power the monitor and to activate the monitor's
"touch" mode. (Fig. 13)
• The monitor is equipped with "touch screen" functionality.
Connecting the USB cable from the mini-PC to the monitor
allows the operator to be able to work normally using all the
PC's functions by simply touching the icons on the screen.
• However, a keyboard and a mouse (not included) can also be
connected to the mini-PC.
4. Connect the USB-C plug of the mini-PC power supply on the
USB-C port on mini-PC ⑤ to power it. (Fig. 14)
5. Connect the power cord to the power supply.
6. Plug the power cord into the wall socket.
8.9 Connecting the microscope power supply
1. Insert the plug of the power supply into the socket
rear of the instrument. (Fig. 15)
2. Plug the power supply into the wall socket.
8.10 Parfocality adjustment (IM-300LD4D)
In order to have the same focus when observing the specimen
through the eyepieces and on the screen, please check that the
microscope is properly set and follow the instructions below.
1. Use a low power objective and focus the specimen using the
microscope focus knobs.
2. Switch to the highest dry objective available on the micro-
scope (40x or 60x) and focus the specimen again.
3. Turn on the live-view on the camera, without changing the
focus on the microscope.
4. While observing the image on the screen, adjust the focus by
turning the knurled knob on the C-mount adapter. (Fig. 16)
①
at the
Page 17
④
⑤
①
F ig. 13 F ig. 13
F ig. 14 F ig. 14
F ig. 15 F ig. 15
F ig. 16 F ig. 16