Optika Italy IM Serie Manual De Instrucciones página 20

10.5 Adjusting interpupillary distance
Observing with both eyes, hold the two eyepiece prism assem-
blies. Rotate them around their common axis until the fields of
view match.
• The graduation on the interpupillary distance indicator
①, pointed by the spot "." on the eyepiece holder, shows
the distance between the operator's eyes. (Fig. 21)
The range of the interpupillary distance is 48-75mm.
10.6 Use of eyeshields
• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded eyeshields avoid
scratching the lenses of eyeglasses. (Fig. 22)
• Use without eyeglasses
Raise eye shields and observe at the microscope placing eyes
to the shields, avoiding external light to disturb the observation.
(Fig. 23)
10.7 Selecting the light path
• The observation head is equipped with an optical path
selector that allows the light to be distributed to the eyepieces
and to the photo / TV port.
1. Move the selector ① to the left (In) or to the right (Out) to
distribute the light. (Fig. 24)
POSITION
Out
In
LIGHT
100% EYEPIECES
0% EYEPIECES - 100% TV
Page 20
①
①
F ig. 21 F ig. 21
F ig. 22 F ig. 22
F ig. 23 F ig. 23
F ig. 24 F ig. 24