Publicidad
Idiomas disponibles
Idiomas disponibles
dedicated holes in the rail and tighten them with wing nuts
(c):
• Attach the plastic plugs to the ends of the longitudinal guide.
NOTE: the longitudinal guide can be mounted vertically or on
its side.
• Slide the longitudinal guide assembly into the rail and tighten
the locking levers to lock it in place.
g) ASSEMBLY OF THE ANGLE GUIDE ASSEMBLY
1. Guide rail
2. Angle adjustment element
3. Bracket (x2)
4. Bar
5. Foldable holding pusher
• Unscrew the screws on the top of the leg and use them to
attach the brackets to the left side of the table.
• Screw the guide rail to the brackets using the threaded holes
on the side of the rail:
EN
Publicidad
