Publicidad
Idiomas disponibles
Idiomas disponibles
DISPOSAL OF WASTE APPLIANCES
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions, or packaging. The materials used in this appliance
are recyclable according to their marking. By reusing, recycling, or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
TROUBLESHOOTING
Problem
The machine does
not start
It is impossible to
make precise cuts
at an angle of 45
o
and 90
o
The material being
cut is blocking the
blade
The material being
cut is blocking the
riving knife
The saw cuts
crookedly,
unevenly, the cuts
are imprecise
Possible cause
a. Power plug not
connected
b. Blown fuse
c. Defective power cord
The worktop is not level or
the tilt angle indicator is
misaligned
The cut element is not
evenly attached to the
guide, the wood is warped
or the edge of the blade is
not at a right angle to the
element
The blade is not properly
aligned
a.
Dull blade
b. The cutting disc is
mounted the other
way round
c.
Dirty blade
d. Wrong blade selection
e. Dirty worktop that
prevents the correct
EN
Action
a. Connect the machine to
electricity
b. Replace the blown fuse
c. Replace the power cord
(by a qualified
person/service provider)
First level the worktop with a
spirit level, then adjust the
cutting disc and check its
angle
Check and correct the guide
or blade or change the piece
of wood that is being cut
Check that the riving knife is
fitted in line with the blade
a.
b.
c.
d.
Replace the cutting
discs
Attach the cutting disc
correctly
Clean and degrease the
blade
Change the blade to
the one dedicated to
the task
Publicidad
