Publicidad
Idiomas disponibles
Idiomas disponibles
•
Using two combination wrenches, lock the engine and loosen the nut
holding the cutting disc (standard right-hand thread):
•
Dismantle the cutting disc clamping ring and then the disc itself by
removing it from the motor spindle and then carefully lifting it up.
Install the new blade in the reverse order of removal.
•
IMPORTANT: the space between the blade guard and the blade itself
should be 2-5 mm:
Check the correctness of assembly of all components of the device - also
•
by briefly starting the machine "on empty".
NOTE: Use only cutting discs that meet the required standards (EN847-1).
EN
Publicidad
