Publicidad
Idiomas disponibles
Idiomas disponibles
• Then attach the locking lever using the washers above and
below the bracket and tighten everything from underneath
with 12 mm nuts.
• Check that the guide bracket moves freely and the locking
lever works smoothly:
• Slide the guide into the rail by inserting the pusher cart
through the back plates that slide along the track. The screws
should be put through special holes in the guide and
tightened with wing nuts.
• Attach the collapsible pusher on the guide by sliding the
carriage and the support plate along the rail and locking that
with wing nuts.
• After installing all of these elements, attach the plastic plugs
to the ends of the guide with self-tapping screws.
• The guide and the sliding element must be level with the
worktop and only then can their assembly screws be
tightened (f):
h) STORAGE OF ACCESSORIES
EN
Publicidad
