2 SAFETY PRECAUTIONS
2.1
Precautions
WARNING!
The Manufacturer declines all responsibilities if the precautions below are not taken.
The accomplishments concerning working environment safety and health regulations indicated by the current
laws (2003/10/CE Directive, 2002/44/CE Directive and 81/2008 Law Decree) have to be carried out either by the
end-user or by the employer: supplying the adequate individual protecting devices, informing about working
risks, performing sanitary survey, etc...
The over-exposure to the vibrations may cause neurovascular lesions to people suffering from circulatory
disorders. In case of symptoms which could be referred to, such as an over-exposure, a specialist has to be
contacted. These symptoms can be torpor, loss of sensitivity, sharp pains, itch, strength reduction or loss,
complexion discoloration or structural modifications. This usually happens in one's hands, wrists and fingers.
WARNING!
Read all safety directions and instructions.
Omissions in the compliance with safety directions and instructions can cause electric shock and fire and/or severe
injuries.
Retain all safety directions and instructions for future use.
The term "Power Tools" used in the safety instructions refers to mains-operated power tools (with power cord) and
battery-operated power tools (without power cord).
2.2
Symbols in the manual
Warning symbol
Risk of cutting or serious injuries
Instruction symbol
Read the instruction manual carefully
Wear protective gloves
Wear eye protection.
Wear protective shoes with non-slipping soles
Do not use the tying tool in the rain or with wet branches
Do not dispose of the tying tool together with household waste.
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 19/07/2019
Page 23