Technical Details; Installation, Pre-Use Controls, Delivery And Handling; Charging The Battery - CAMPAGNOLA EASY S Manual De Uso Y Mantenimiento

3.6

Technical details

Electric pruning shear
1
2
3
4
5
6
7
Lithium ions battery
1
2
3
4
Battery charger
1
2
3
4
5
4 INSTALLATION, PRE-USE CONTROLS, DELIVERY AND
HANDLING
4.1

Charging the battery

WARNING!
Never expose the battery to extreme conditions such as too high temperatures or shocks.
Operator's injuries can be caused by leakage of battery electrolytic solution.
WARNING!
Disconnect the battery from the tool before charging.
•
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before using it for the first time.
•
The battery is not fully charged when you buy it. It must be recharged for 4-5 hours before first using it.
•
Recharge the battery when the indicator shows just one led light.
•
Do not leave the battery in charge for more than 5 hours. Do not make it become completely flat, otherwise its life
span will be reduced.
•
The battery must be replaced when its autonomy becomes too short. Just use the original batteries supplied by
the Manufacturer.
•
Always comply with the safety instructions and the environment protection guidelines.
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 19/07/2019
Max cutting diameter
Rated voltage
Rated power
Rated current
Current protection
Protection class
Weight
Capacity
Voltage
Autonomy
Weight
Input voltage
Output voltage
Charging current
Protection class
Charging time
EASY S
30 mm in case of green
branches
DC 44 V
300 W
10.0 A
≥35 A
III
0.7 kg
4.4 Ah
44 V
8-10 h
1.5 kg
100-240 V AC, 50-60 Hz
DC 50.4 V
1.0 A
II
4-5 h
EASY L
36 mm in case of green
branches
DC 44 V
350 W
8 A
≥40 A
III
0.8 kg
4.4 Ah
44 V
8-10 h
1.5 kg
100-240 V AC, 50-60 Hz
DC 50.4 V
1.0 A
II
4-5 h
Page 29