Mobile Blade Replacement - CAMPAGNOLA EASY S Manual De Uso Y Mantenimiento

•
Check and remove any cutting residues under the trigger protection. Remove the greasing screw (6 ) and put grease
inside the hole (7):
•
Repeat the operations in reverse to reassemble the tool.
6.4

Mobile blade replacement

•
Use original blades only. Please contact an Authorized Service Point to buy our original blades or spare parts.
•
With the tool connected to the battery, open the blades by pulling the trigger (1), then switch off the battery and
remove the cable (2):
•
Remove the trigger protection by unscrewing the fixing screw (3). Disengage the protection first from the rear side
(4) and then from the front side (5):
•
Remove the circlip (6) and the pin (7) from the blade operating system:
Use and Maintenance Manual – Original
Instructions Rev.: 02, Date 19/07/2019
Page 33