Publicidad
Idiomas disponibles
Idiomas disponibles
6.6
Closing the product
The tasks described in this section may only
be carried out by a qualified electrician.
ATTENTION
Material damage due to crushed components or
cables
Damage and malfunctions can occur due to
crushed components or cables.
u When closing the product ensure that compon-
ents or cables are not crushed.
u Fix components or cables in place if necessary.
Fig. 16: Closing the product
u Flip up the top section of the housing.
u Screw the top and bottom housing sections to-
gether. Tightening torque: 1.2 Nm
Removing the protective film
In the delivery state, a protective film is applied in
the area of the LED status display. MENNEKES can-
not guarantee that the protective film can be re-
moved without residue if the product has been in
use for some time and has been exposed to envir-
onmental influences.
u Remove the protective film during commission-
ing.
Fig. 17: Removing the protective film
Attach front cover
1.
2.
Fig. 18: Attach front cover - 1
3.
Fig. 19: Attach front cover - 2
u Attach front cover and snap into place.
EN
23
Publicidad
