3.
If the bin is not fitted correctly, the machine will not work and
the lower part of the oval display and the Select and Play/
Pause buttons will flash on and off. Flashing stops when the
bin is fitted properly.
4.
If the bin is full, the machine will not work and the lower part
of the oval display and the Select and Play/Pause buttons will
remain on. You should empty the bin and replace it correctly.
5.
If for some reason the machine becomes blocked while it is
operating, the motor will stop automatically after a few sec-
onds. The four sectors of the oval display and the Select
and Play/Pause buttons will flash on and off. In this case you
should call the technical service.
Bin
Error
6.
If the oval display or the Select and Play/pause buttons do not
light up, this is due to a lack of power. Check that the switch is
on and that the safety fuse has not blown [Fig. 20].
Bin
Full
Blockage
Error
Service Manual
25