DR-HO’S circulation promoter Manual De Instrucciones página 5

8
INTENDED USE
DR-HO'S Circulation Promoter has
been developed as a self-care
household device for the whole family
and is based on physics, modern
microelectronics and clinical practices
this system to provide head to toe
pain therapy.
It can stimulate healthy muscles and
increases local blood circulation,
thereby improving and facilitating
muscle performance and temporarily
relieving pain associated with sore
and aching muscles. It uses electrical
current to stimulate nerves and
relieve chronic, intractable pain and
pain associated with arthritis relating
to tension at the back of the neck.
IMPORTANT!
The Pain Therapy Device, model
CP-1, is intended for the relief of
pain associated with sore or aching
muscles in the following anatomical
locations: the upper and lower back,
back of the neck, upper extremities
(shoulders and arms) and lower
extremities (legs and feet) due to
strain from exercise or activities
of daily living principally regular
household and work activities.
Note! This product is certified as
medical device in the European
Union under the Medical Device
Directive 93/42/EEC by SGS CE1639,
exclusively for the indication(s) of
relief of pain associated with sore or
aching muscles. Other non-medical
uses escribed to this device are not
within the scope of CE certification,
and users should be aware product
performance and/or safety has not
been evaluated by SGS for those
purposes.
SPECIFICATIONS
Basic specifications
Power source DC 3.0V, 2 AAA batteries
Method of line current isolation Type BF applied part
Number of output channels 1
Number of output programs 3
Output intensity level 5 steps
Timer range 10, 20, 40 min
Weight Pain Therapy System: 66g, Foot base: 1500g, Small body
pads: 10g, Foot relieve pads: 200g, FlexTone pads: 37g
Dimensions Pain Therapy System: 90 x 78 x 16 mm, Foot base: 39 cm
Ø, Small body pads: 46 x 46 mm, Foot relieve pads: 260 x
110 mm, FlexTone pads: 80 x 120 mm
Output specifications
Waveform Pulsed, symmetric, biphasic, rectangular
Maximum output voltage 40Vp @ 500Ω
Maximum output current 80mA @ 500Ω
Pulse duration 200µs
Pulse frequency 13.7~48.5 Hz
Net charge (per pulse) 0μC @ 500Ω (Method: Balanced waveform)
Maximum phase charge 19.2µC @ 500Ω
Maximum average current 1.53mA @ 500Ω
Maximum current density (rms) 0.073mA/cm2 @ 500Ω
Maximum average power density 0.056mW/cm² @ 500Ω
9
80Vp @ 2kΩ 95Vp @ 10kΩ
40mA @ 2kΩ 9.5mA @ 10kΩ