Instructions For Use; Preparation; Unpacking And Start-Up - ANEXO SPEED PRO Manual De Usuario

INSTRUCTIONS FOR USE

PREPARATION

To start to extract juice, you must follow the steps below:
Unpack your juicer and place it on as flat a surface as possible.
1
Make sure that the mains voltage coincides with the voltage indicated on the machine
2
identification label that you will find on the machine.
3
Ensure that no obstacles hinder you during the unpacking process.

UNPACKING AND START-UP

Follow the instructions given, depending on the machine model you have purchased.
SPEED BASIC PRO
The following components come loose and must be mounted if necessary: Right cover side outlet
(2), Left cover side outlet (3), Power cable (15), Cable protector (16), Peel bucket (20), Drip try (21),
Plastic juice container (30), Inner plastic filter (31), Plastic juice filter (32).
See Figures 1 and 2.
SPEED PRO SELF SERVICE
The following components come loose and must be mounted if necessary: Right cover side outlet
(2), Left cover side outlet (3), Power cable (15), Cable protector (16), Peel bucket (20), Drip try (21),
SS juice container (40), SS Subfilter (41), SS/TANK filter (42), Pulp sweeper (43), SS tap (44), Machine
supplement (47).
See Figures 1 and 3.
SPEED PRO SELF SERVICE PODIUM, SPEED PRO SELF SERVICE PODIUM DRAIN&CLEAN SYSTEM
The following components come loose and must be mounted if necessary: Right cover side
outlet (2), Left cover side outlet (3), Power cable (15), Cable protector (16), SS juice container (40), SS
Subfilter (41), SS/TANK filter (42), Pulp sweeper (43), SS tap (44).
See Figures 1 and 4. See section SS/TANK STAND (90) for information about your machine stand.
33