ANEXO SPEED PRO Manual De Usuario página 37

PLASTIC JUICE CONTAINER (30)
Make sure that the sealing gasket is correctly mounted on the container (Figure 11). Then place
the container in the machine. Line up and place under the container on the four lugs that you will
see on the machine (Figure 2).
PLASTIC INNER FILTER (31)
Place on the inside of the juice extraction container (Figure 2).
PLASTIC JUICE FILTER (32)
Place on the inside of the juice extraction container (Figure 2).
SS JUICE CONTAINER (40)
Line up the container in the main opening. At the same time, line up the two side lugs at the ends
of the container and press. Pressing the side buttons may help mount it (Figure 12).
SS SUB-FILTER (41)
Place on the inside of the juice extraction container (Figure 3).
SS/TANK FILTER (42)
Line up the 2 rear openings with the 2 inner rear lugs of the container. Let the filter fall forwards
and line up the front openings with the front lugs.
The filter rests on the SS juice container (40) (Figure 3) or Tank juice container (59) (Figure 5).
PULP SWEEPER (43)
Make sure that the inner guide of the pulp sweeper is correctly mounted (Figure 13).
You can extract or insert the pulp sweeper by turning the side catch 90º (Figure 13).
Note: Make sure that the catch is in its closed position, so that the pulp sweeper can never
accidentally drop from the filter.
37