ANEXO SPEED PRO Manual De Usuario página 38

SELF SERVICE TRAY TAP (44)
To mount the Self Service tap in the container, line up the rear lug and screw the floating nut on
the rear of the tap (Figure 3).
TAP OPERATION
You can make the tap work normally by pressing and releasing it to extract the juice
(Figure 14.1).
You can lock/unlock the "free spout" or "discontinuous spout" function by leaving the catch
in position "a" (free position) or in either of the 2 positions "b" for locking the relative spout
(Figure 14.2).
You can anchor the button in "free spout" position. To this end, turn the ring with the dotted/
solid lines until the solid line coincides with the glass symbol.
Release the button. This will secure it.
To release it, just press the button again (Figure 14.1).
For daily cleaning, you can remove the upper part of the tap and the inlet spout (Figures 14.3
and 14.4).
DETECTOR TUBE GASKET (46)
If required, this gasket can be removed for cleaning (Figure 3 or 4).
MACHINE SUPPLEMENT (47)
Use this supplement to raise the machine (Figure 3).
Important! The machine must never be placed on the supplement by one single person.
TANK JUICE CONTAINER (50)
Line up the two side lugs at the ends of the container and press. Pressing the side buttons may
help mount it (Figure 15).
To remove the container, just press the side buttons and pull out towards you.