ANEXO SPEED PRO Manual De Usuario página 46

SELF SERVICE TAP (44)
You have purchased a multi-function tap. This enables you to produce juice either discontinuously
or continuously without having to press the button.
Locking: You may lock the tap at any time for it to only work in one of the 2 possible ways.
See the different possibilities in: ASSEMBLY OF COMPONENTS ACCORDING TO MODEL, SS TAP (44).
SPEED PRO TANK PODIUM, SPEED PRO TANK PODIUM DRAIN&CLEAN SYSTEM,
SPEED PRO COOLER
Make sure that the TANK (53) or Tank (70.6) is placed as close as possible to the sensor on the base.
Make sure that the buoy is placed correctly on the lid and that it moves freely (Figure 5 and Figure 6).
If the Tank/Cooler buoy (52) is not in place, the machine will not work.
AUTOMATIC MODE
When you connect the machine at the start of the day, select the START button
for the machine to start up.
The machine starts to squeeze until the tank is full and the Level detector (56)
does not find the Tank/Cooler buoy (52). The machine will stop then.
When the juice level gets low again, the machine will start up again, about 15" after it has not
detected the buoy, and so on and so forth, in automatic mode.
The full or half full tank symbol will appear unless STOP has been pressed, indicating that although
the machine is in automatic mode, it has stopped, waiting for the tank to be emptied, in order to
re-start the filling process. When you press STOP, the symbol will disappear as the machine is no
longer operating.
1
2
3
4