Configuration - ANEXO SPEED PRO Manual De Usuario

SPEED PRO COOLER: COOLER UNIT
Switch the cooler unit on by activating the switch on the left of the juice outlet. You can adjust the
juice temperature with the control situated on the right. Turn in clockwise direction for colder juice
and anti-clockwise direction for less cold juice.
Activate the tank lever to fill a glass or jug.
Important! Remember to switch off the Cooler unit (70) when you switch off the main machine to
avoid unnecessary consumption.

CONFIGURATION

Your Zumex Speed Pro juicer enables you to set parameters to your liking.
Use the electronic device to choose and program the operating mode of your machine. With it, you
can control attributes and functionalities following the MENUS enclosed.
To enter the MENU press the STOP and MODE buttons for at least 2 seconds and enter the default PIN
(0000).
After entering the menu, you can set:
LANGUAGE: You have a choice of 23 available languages.
PIN: See or change the current PIN so that nobody else can change the machine parameters.
COUNTER: See total or partial counter of the machine. Reset the partial counter, visible on the
main screen. To reset the machine counter, press STOP + START for 3 seconds until the counter
indicates 0000000.
Ascending or descending CREDIT: You can program the machine credit so the machine can be
stopped, in ascending order or descending order, until the machine has been programmed again.
MODE LOCKING SYSTEM: You can get the machine to only work in Automatic or Professional
and even so the number of oranges or volume to be squeezed cannot be changed, so that it only
squeezes the quantity set by you.