ANEXO SPEED PRO Manual De Usuario página 41

INDIVIDUAL FEATURES FOR SS/TANK STAND (90)
For the Self Service and Tank stands, secure the drip tray with its filter in the display stand.
If you have purchased a model with Drain&Clean System:
Important! Unplug the machine from the wall socket.
If fitted, remove the Peel chute (90.6), the SS stand filter (90.7A) and the Stand hopper (90.3)
(Figure 8). Open the front door (Figure 8).
Find the upper hole (Figure 7.2) and insert your hand, taking hold of the Flexible tube (80.4) and
placing it in the hole (Figure 7.1). Do not pull or hold any other part of the machine.
Later, place the lower cover of the tube with the two securing knobs supplied and fit all the
previously removed parts back on.
See parts breakdown on how to fit the components (Figure 8).
Component 90.7 varies depending on the stand model purchased:
Self Service stand: Component SS stand filter (90.7A).
Tank stand: Component TANK tank guides (90.7B).
The position of components Tray front (90.8) and Tray filter (90.9), can be adjusted to be able to
adapt them to different bottle and glass formats.
INDIVIDUAL FEATURES FOR COOLER STAND
See Figure 6 and 9.1 on how to fit the components correctly.
Pass the power cable of the Cooler unit through the hole on the rear door. To do this, you can
unscrew the door if necessary (Figure 9.2).
2. DETACHMENT
The components are detached in reverse order to that indicated in each section.
41