Descargar Imprimir esta página

Whirlpool KT 6003 Manual Del Usuario página 54

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Safety
Controls lock
When the hob is in use, you can lock the control panel to avoid any accidental changes to the
settings (by children or when cleaning, for example). Just touch the
key, and the indicator light
to the right of the key turns off.
To adjust the heating power or stop cooking, just press key
: for 2 seconds: the controls are
enabled again.
Safety devices
Several safety devices have been fitted onto the hob to protect its electronic components.
After unlocking the control panel if no keys are pressed for 30 seconds (no cooking zones in
operation), the unlock indicator light turns off: the hob is locked.
Blinking indicators
L L L L L An object (such as a saucepan or a lid, etc.) placed for more than 10 seconds on the control
zone,
L L L L L boiled-over liquids or food spilled on the control zone,
L L L L L extended pressure on the control zone,
could cause the beep to sound, followed by the three power level displays blinking, the cooking
zone(s) in use turn off.
· to stop the beep from sounding, remove the cause of the malfunction,
· to put a stop to the blinking, press key
for 2 seconds: you can control the cooking zones again.
Overheating
Prolonged use of the hob could cause the electronic components to overheat. A thermal protection
device momentarily sets a reduced power (setting 3) on the back right cooking zone. The power
level displays blink to advise you that this safety measure has been taken. When the temperature
has gone back to normal, the power level displays stop blinking and the zone can be used at higher
power settings if need be.
55

Publicidad

loading