Publicidad
Idiomas disponibles
Idiomas disponibles
Very important: : It is vital that you ensure the glass ceramic hob is built into a perfectly flat
supporting surface. Deformations due to improper fastening could alter the characteristics of
the hob and compromise its performance.
Take particular care in ensuring the seal surrounding the hob is correctly in place, in
order to avoid any leaks into the supporting cabinet.
The 4 fastening springs are fastened by 4 Torx screws.
To remove the hob from its place of installation, you should either unscrew the 2 Torx screws at
the front or the 2 Torx screws at the back.
This is why it is vital that these 4 screws be kept accessible at all times.
REAR SPRING ASSEMBLY
Fastening the hob
REAR LEFT MOUNTING
REAR RIGHT MOUNTING
HOB UNIT FAST DOWN
FRONT LEFT MOUNTING
FRONT RIGHT MOUNTING
SEAL MOUNTING
FRONT / REAR
MOUSSE 5x8 mm
FRONT OF THE HOB UNIT
RIGHT / LEFT
WORK
SURFACE
59
Publicidad
