Publicidad
Idiomas disponibles
Idiomas disponibles
7.
Numeric symbol used to identify the machine hour meter. See
8.
Graphic symbol used to indicate the filter shaker performance level. See
MODE" on page
51.
9.
Graphic symbol used to indicate that the EXTRA-PRESSURE (CENTRAL BRUSH) function is active. See
"EXTRA PRESSURE FUNCTION (CENTRAL BRUSH)" on page
10. Graphic symbol used to indicate that the vacuum system is deactivated. See
ACTIVATION/DEACTIVATION" on page
8
7
6
PEDALBOARD
The pedalboard, in the footrest area, is divided up as follows:
1. Accelerator pedal (1) (Fig.1), on the right of the pedalboard, and activated with the right foot.
N.B.: forward speed can be regulated by either pressing the pedal (1) (Fig.1) quite firmly or pressing the
button (2) on the control panel (Fig.2). See
2. Front flap pedal (3) (Fig.1), on the left of the pedalboard. Use the heel of your left foot to activate the pedal (3).
N.B.: the pedal (3) is used to raise the front flap when close to bulky waste (e.g. tin cans). When the front
flap is raised, the waste is collected directly by the central brush and thrown into the debris hopper.
3. Brake pedal (4) (Fig.3), on the left of the pedalboard, and activated with the left foot.
N.B.: if the accelerator pedal (1) is released while moving, the machine electronics start to slow down with a
gentle deceleration ramp. See
N.B.: the machine is fitted with a mechanical pedal brake (4) in addition to the machine electronics that
handle the braking process. The mechanical braking action depends on the degree of force applied to the
pedal (4).
51.
1
2
5
4
"ADJUSTING THE FORWARD SPEED" on page 50
"BRAKING CONTROL" on page
26
26
"HOUR METER" on page
"ADJUSTING THE FILTER SHAKER
52.
"VACUUM SYSTEM
3
10
54.
49.
9
.
Publicidad
