Publicidad
Idiomas disponibles
Idiomas disponibles
8
9
10
11. Tighten the knobs (2) of the central brush inspection carter (Fig.13).
12. Close the left-hand inspection door (1) (Fig.14).
2
13
ASSEMBLING THE SIDE BRUSHES
To assemble the side brushes, proceed as follows:
1.
Take the machine to the maintenance area.
2.
Do everything necessary to ensure the machine is in a safe condition. See
CAUTION: it is recommended to wear the appropriate PPE (Personal Protective Equipment), suitable for the
work to be carried out.
3.
Go to the right-hand side of the machine.
4.
Remove the knob (1) fixing the side brush to the gear motor by rotating the right brush clockwise and the left
brush anti-clockwise (Fig.1)..
5.
Remove the washer (2) holding the side brush in place (Fig.2).
6.
Insert the side brush, making sure to correctly position the pins (3), present in the brush support, in the holes
(4), present in the brush (Fig.3).
1
1
7.
Fix the brush to the flange using the knob (1), remembering to put the washer (2) in between the knob and the
brush.
8.
Once this brush has been fitted, move on to the left-hand one (if used).
10
11
1
14
2
2
37
37
3
12
"DASHBOARD" on page
3
4
3
25.
Publicidad
