Publicidad
Idiomas disponibles
Idiomas disponibles
1
1
6.
Remove the central brush inspection carter (4) (Fig.4).
7.
Insert the brush in the tunnel in the machine frame (Fig.5).
N.B.: when the brush is mounted correctly, the cusps on the brush form an arrow ˄ when seen from above in
the forward movement direction (Fig.6).
4
4
8.
Rotate the brush until the fastening hooks (5) in the driving towing hook (6) (Fig. 7) correctly enter the slots (7)
in the brush (Fig.8).
9.
Insert the central brush inspection carter (4) (Fig.9).
5
6
7
ATTENTION: make sure the fastening hooks (8) in the idle towing hook (9) (Fig. 10) correctly enter the slots
(10) in the brush (Fig.11).
10. Tighten the knob (3) of the central brush lifting arm (Fig.12).
2
2
5
7
8
36
36
3
3
6
4
9
Publicidad
