Publicidad
Idiomas disponibles
Idiomas disponibles
WORKING PROGRAMS
The machine can be used with the following working programs:
1. ECO MODE: for light maintenance cleaning tasks, using fewer resources and operating at a low noise level.
See
"WORK PREPARATION CHECKLIST" on page
2. MANUAL MODE: the operator freely evaluates and chooses the parameters based on the cleaning
requirements that arise during the course of the intervention (see paragraph
PROGRAM" on page
3. PROGRAM ZONE: for recurring interventions at work sites, there are three working programs stored in the
machine's memory that can be easily selected in order to help the operator carry out the intervention correctly,
see paragraph
"PROGRAM ZONE WORKING PROGRAM" on page
The work parameters of the individual working programs are the following:
Program
ECO MODE
MANUAL MODE
ZONE-01 PROGRAM
ZONE-02 PROGRAM
ZONE-03 PROGRAM
N.B.: the parameters of the working programs are pre-set in the factory. The value ranges from a minimum
of 1 to a maximum of 3.
ECO MODE WORKING PROGRAM
The ECO MODE working program can be used for light maintenance work.
The ECO MODE program is a program which guarantees the best possible performance in terms of consumption
and cleaning.
The ECO MODE working program can be enabled:
1.
By pressing the button (1) on the control panel.
2.
With transfer working mode enabled, press the central brush control button (2) or the side brush control button
(3).
N.B.: As soon as the button (1) is pressed, the ECO MODE working program symbol (4) will appear on the
control display.
N.B.: to deactivate the ECO MODE working program, simply:
•
Press the button (1) on the control panel.
•
Activate the EXTRA-PRESSURE (CENTRAL BRUSH) function. See
(CENTRAL BRUSH)" on page
•
Activate the MANUAL MODE program. See
•
Activate the PROGRAM ZONE. See
N.B.: When the ECO MODE program is not enabled, the relative symbol (4) will not be present in the control
display.
41).
Speed
Brush
2
2
3
2
52.
"MANUAL MODE WORKING PROGRAM" on page
"PROGRAM ZONE WORKING PROGRAM" on page
39).
41).
Vacuuming
1
1
1
1
2
3
3
3
"EXTRA PRESSURE FUNCTION
40
40
"MANUAL MODE WORKING
Detergent
Solution
1
1
2
3
41.
41.
Publicidad
