Publicidad
Idiomas disponibles
Idiomas disponibles
O R I G I N A L I N S T R U C T I O N
•
With a 14 mm Allen key, unscrew the locking ring 4 (74500-12100) and remove the seal 5 (74500-12100) from the
module body 3 (74500-12100). When reassembling, make sure that the taper of the seal is oriented as shown in the
general assembly drawing.
•
Replace the seals 5 & 8 (74500-12100) before reassembling.
•
To reassemble the seals, it is necessary to use the tools 07900-00709 and 07900-00641.
Assembly Instructions:
•
Clean all the parts thoroughly. Inspect and replace any parts that are worn or damaged.
•
Assembly should be carried out in reversed order to the dismantling instructions.
•
Set the tool stroke and attach the nose assembly.
6.7 PROTECTING THE ENVIRONMENT
•
Assure conformity with applicable disposal regulations. Dispose all waste products at an approved waste facility or site
so as not to expose personnel and the environment to hazards.
E N G L I S H
13
Publicidad
