Publicidad
Idiomas disponibles
Idiomas disponibles
E N G L I S H
2. SPE CIFICATION
2.1 INTENT OF USE
The hydro-pneumatic 74500 module is designed to place Stanley Engineered Fastening Blind Rivet Nuts at high speed
making it ideal for batch or fl ow-line assembly in a wide variety of applications throughout all industries.
When coupled to a compatible hydraulic and pneumatic power source and the relevant nose assembly is attached, it is then
used to install blind rivet nuts up to a diameter of M12, in Industrial Environments.
The placing module may only be used in accordance with the operating instructions for placing Stanley Engineered
Fastening structural rivets.
DO NOT use under wet conditions or in the presence of fl ammable liquids or gases.
The safety instructions must be followed at all times.
2.2 TOOL SPECIFICATION
Force:
Pressure:
Stroke:
Piston area:
Oil Capacity:
Air Pressure:
Air Consumption:
Rotational Speed:
Weight:
2.3 TOOL DIMENSIONS
All dimensions are shown in millimetres.
6
SPECIFICATION
Pull at stated pull pressure
Maximum
Piston Stroke
Nominal
Nominal
Maximum
Per Cycle
Forward / Reverse
Nominal
IDENTIFY WITH DATE CODE USING 2.5(3/32) CHARACTERS
O R I G I N A L I N S T R U C T I O N
METRIC
IMPERIAL
27.5 kN
6182 lbf
250 bar
3626 PSI
10 mm
0.39 in
2
1100 mm
1.71 in
3
7.7 cm
0.47 in
6 bar
87 PSI
425 l/min
2320 rpm
1.50 kg
3.31 lb
2
3
Publicidad
