Publicidad
Idiomas disponibles
Idiomas disponibles
O R I G I N A L I N S T R U C T I O N
3. PUTTING IN SERVICE
IMPORTANT - RE AD THE SAFETY RULES ON PAGES 3 - 5 AND THE TECHNICAL MANUAL SUPPLIED WITH THE
COMPLETE MACHINE CAREFULLY BEFORE PUTTING INTO SERVICE.
THE MODULE IS DESIGNED TO OPERATE AS PART OF A COMPLETE AUTOMATED OR SEMI-AUTOMATED MACHINE.
WHEN THE TOOL IS CYCLED IT MUST NOT BE HELD IN THE HAND OR BE IN CONTACT WITH ANY PART OF THE BODY.
THERE IS A POSSIBILITY OF A SHEAR INJURY WHEN THE PISTON RETRACTS.
3.1 MOUNTING/ADJUSTMENT
Instructions on installing and removing the module from the machine frame will be included in the Technical Manual
supplied with the machine. The Technical Manual will include full instructions on putting the module into service, together
with instructions on the dismantling, maintenance and assembly of the Nose Equipment.
3.1.1
CONNECTION
PNEUMATIC DRIVE
Three connections are on the back side of the pneumatic drive:
•
Right-hand motion.
•
Left-hand motion.
•
Exhaust air.
HYDRAULIC DRIVE
For operating the single-acting hydraulic drive we recommend a pneumatic-hydraulic pressure intensifi er.
PUN-8-bl
LH motion
Compressed air motor 74500-12200
Riveting module 74500-12000
Pressure intensifl er
Support for return
stroke may. 0-2 bar
PUN-8-bl
PUN-8-sw
Exhaust air
RH motion
E N G L I S H
7
Publicidad
