Publicidad
Idiomas disponibles
Idiomas disponibles
Program Function
Vacuum Level—is the vacuum percentage detected in the
chamber before moving on to the next step of the program.
Values are 0–99%.
Vacuum Plus—extends vacuum cycle for a set number of sec-
onds after the program's vacuum level is reached. Some items
need extra time to evacuate all gases from the chamber. Vacuum
level must be set to 99% for Vacuum Plus to be enabled.
Vacuum Time—determines the length of the vacuum cycle; maxi-
mum time recommended is 60 seconds. Set the vacuum level to
0 to enable this function.
Liquid Control—senses evaporation in evacuated air due to
boiling in the bag. If evaporation is detected, the program stops
the vacuum pump and moves to the next step; this protects the
pump from taking in moisture, which can lead to corrosion and
premature failure.
Liquid Control Plus—allows extra time beyond Liquid Control to
finish evacuating the chamber. Use caution to ensure moisture
is not being sucked into the vacuum pump. To use this function,
Liquid Control must be enabled.
Seal Time—is when seal bars will be actively heating to seal the
product bag; recommended time is 2.0-2.5 seconds for most
commercially available bags.
Soft Air—is gently released into the chamber after sealing to
protect delicate products prevent and bag damage.
Place the Food in the Chamber
WARNING
Burn Hazard
Sealing Bar may become hot after repeated use. Do not touch
Sealing Bar when placing vacuum bags in the chamber.
5. Place food in a vacuum bag that fits entirely in the chamber.
6. Place the bag in the chamber and smooth the open end over
the sealing bar. Multiple vacuum bags can be placed over the
sealing bars as long as they do not overlap.
7. For small items, use at least one insert plate under the bag.
This fills empty chamber space and reduces cycle time.
Function
0
1
2
Vacuum
99
99
97
Level (%)
Vacuum Plus
15
0
0
(seconds)
Liquid Con-
Off
Off
Off
trol
Liquid
0.0
0.0
0.0 0.0
Control Plus
(seconds)
Seal Time
2.0
2.0
2.0 2.0
(seconds)
Soft-Air
3
3
0
(seconds)
Program Factory Defaults
3
3
4
5
6
7
8
99
99
99
99
50
90
0
4
0
0
0
0
Off
Off
On
Off
Off
Off
0.0
0.0
0.0
0.0
0.0
2.0
2.0
2.0
2.0
2.0
8
3
0
0
2
0
Vacuum Packing Machine Dual 16" Sealing Bars
Run the Program
1. Close the Lid; cycle starts automatically. Lid Retainer should
not be used.
2. When the lid opens, sealing is complete; remove the bag.
3. Wait 15 seconds before sealing another.
Stopping a Cycle
The machine can be stopped before a packing cycle is complete.
• Press
to stop the vacuum and continue to the next function.
stop
vac
• Press
to stop and cancel the program.
stop
Editing a Program
1. Select program 1-9 to customize by pressing
number you would like to edit displays. Zero cannot be edited.
2. Press
to edit. When the number flashes, select a function:
Vacuum Level
1. Press
until
Vacuum LED
illuminates.
2. Press
or
to
stop
stop
vac
set vacuum level.
3. Press
to confirm.
4. To edit Vacuum Plus,
continue to the steps
below.
Vacuum Plus
1. Turn on Vacuum Plus
by pressing
until
the Vacuum LED
illuminates and
displays.
2. Press
or
to
stop
stop
vac
set seconds; red dot
indicates Vacuum Plus
is active.
3. Press
to confirm.
9
60
0
Sealing Time
Off
1. Press
until the Seal LED
illuminates.
0.0
2. Press
or
to set seconds.
stop
stop
vac
3. Press
to confirm.
2.0
0
3. Save program by pressing
until the
Vacuum Time
Liquid Control
(Use when packing
liquids.)
1. Turn on Liquid
1. Press
until the
Control by
Vacuum LED
pressing
illuminates.
Display should
2. Press
to turn
read
stop
vacuum pressure OFF.
2. To edit Liquid
3. Press
once to
Control Plus,
modify Vacuum Time.
continue with
The LED displays
the steps below.
3. Press
4. Press
or
to
confirm.
stop
stop
vac
set number of
seconds; a red dot
indicates Vacuum Time
is active.
5. Press
to confirm.
Liquid Control Plus
1. Turn on Liquid
Control Plus by
pressing
until the Vacuum
LED and
are displayed.
2. Press
to set time
stop
in tenths of a
second.
3. Press
confirm. A red
dot indicates
Liquid Control
Plus is active.
Soft Air Time
1. Press
until the Soft-Air
LED illuminates.
2. Press
or
to set the
stop
stop
vac
number of seconds.
3. Press
to confirm.
.
to
or
stop
vac
to
Publicidad
