universalblue UBE2423-23 Manual De Instrucciones página 20

The induction
hob makes a low
humming noise
when used on
a high heat setting.
Fan noise coming
from the induction
hob.
Pans do not become
hot and appears in
the display.
The induction hob
or a cooking zone
has turned itself off
unexpectedly, a tone
sounds and an error
code is displayed
(typically
alternating with
one or two digits in
the cooking timer
display).
•
This is caused by the technology
of induction cooking.
•
A cooling fan built into your
induction hob has come on to
prevent the electronics from
overheating. It may continue to
run even after you've turned the
induction hob off.
•
The induction hob cannot detect
the pan because it is not suitable
for induction cooking.
•
The induction hob cannot detect
the pan because it is too small for
the cooking zone or not properly
centred on it.
•
Technical fault.
This is normal, but the noise should
quieten down or disappear completely
when you decrease the heat setting.
This is normal and needs no action. Do
not switch the power to the induction
hob off at the wall while the fan is
running.
Use cookware suitable for induction
cooking. See section 'Choosing the right
cookware'.
Centre the pan and make sure that its
base matches the size of the cooking
zone.
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
20