Publicidad
Idiomas disponibles
Idiomas disponibles
3.3 Instrument Back
3.3.1 Instruction Label/Safety Information
Figure 2
WARNING: The wrong direction of rotation may
be displayed if a lead is connected in error to the
neutral conductor. Refer to the instrument's back
label (see Figure 2 above) for a summary of the
various display possibilities.
3.4 Non-Contact Rotary Field Indication
1. Disconnect all test leads from the Phase & Motor Rotation
Meter.
2. Position the Indicator on the motor so that it is parallel to the
length of the motor shaft, the Indicator should be one inch or
close to the motor.
3. PRESS the ON/OFF Button, the green ON indicator shows
that the instrument is ready for testing.
4. Either the Clockwise or Counterclockwise Rotary indicator
illuminates showing the Type of rotary field direction present.
12
Phase & Motor Rotation Meter Model 6611
U n =400/230 VAC Ume=1...400 VAC
fn=2...400 Hz
I L1 =I L2 =I L3
3.5 mA/400 V
1x9 V
Chauvin Arnoux
, Inc.
®
d.b.a AEMC
Instruments
®
15 Faraday Dr. Dover NH 03820 - USA
www.aemc.com
Figure 3
Publicidad
