Seca 604 Instrucciones De Uso página 101

9.4 Setting up network functions
ð The setting is active.
ð Measured results are displayed in the selected system of units.
5. To exit the menu, press the
CAUTION!
Malfunction, implausible measured results
If network settings are not carried out correctly, measured results may
be assigned incorrectly or lost.
► Have the steps described in this section carried out by your admin-
istrator or hospital technician. If you have any questions, contact
seca Service.
NOTE
As soon as the device is connected to a network, the
tion is activated automatically. The
tivated if the device is connected to a network.
You can connect the device to an EMR system. Use the connection to assign
the measured values to an electronic patient file. The following conditions must
be met:
• Device is set up in the
seca connect 103
• Device is connected to your network via a LAN or WiFi connection
• An interface to your EMR system is set up in the
• A barcode scanner is connected to the device
On connection to an EMR system, the measurement procedure consists of the
following steps:
• Record ID(s) using the barcode scanner
• Record measured values on the device
• Use the
seca connect 103
system
key.
function cannot be deac-
Autohold
software
seca connect 103
software to transmit measuring results to the EMR
seca
software
Configuration (ID display) • 101
English
func-
Autohold
software