Publicidad
Idiomas disponibles
Idiomas disponibles
7.2
Adjusting display settings
Setting display backlighting (LCd)
Switching units (Unit)
You can change the duration and brightness of the display backlighting.
1. Press the
key for approx. 4 seconds.
ð The menu is displayed.
2. Select the
menu item.
Lcd
3. Confirm your selection.
4. Select a menu item.
– Duration (
)
dur
– Brightness (
)
bri
1. Confirm your selection.
ð The current setting is displayed.
2. Select the desired setting.
Function
Duration (
)
dur
Brightness (
bri
)
1. Confirm your selection.
ð The setting is adopted.
ð The menu closes.
You can select the units in which weight and height are to be displayed (for non-
verified scales only).
CAUTION!
Patient hazard
To prevent misinterpretations, measuring results for medical purposes
must only be displayed and used in SI units (kilograms/grams, meters/
centimeters). Some devices have the option of displaying measuring
results in different units. This is purely an additional function.
► Only use measuring results in SI units.
► The user takes sole responsibility for the use of measuring results in
non-SI units.
1. Press the
key for approx. 4 seconds.
ð The menu is displayed.
Setting
•
(approx. 20 sec.)
SHort
•
(approx. 40 sec.)
Lon9
•
PErM
(permanent)
•
%
100
•
50
%
•
OFF
Configuration (basic display) • 75
English
Publicidad
